Focus L4-2.0L SOHC VIN P (2000)
^
Use code information shown below:
^
Program Code - 00T04
^
Casual Component - RECALEM
^
Condition Code - 42
^
Labor Operation - Refer to Attachment II
Attachment II - Parts and Labor Information
LABOR ALLOWANCES
PARTS REQUIREMENTS
Attachment III - Technical Information
NOTE
SOME VEHICLES NAY HAVE HAD THE PCM REPROGRAMMED PREVIOUSLY, ON THESE VEHICLES, VERIFY CALIBRATION
USING APPROPRIATE DIAGNOSTIC TOOL.
SERVICE PROCEDURE
1.
Reprogram the Powertrain Control Module (PCM) to the latest calibration listed in the table as shown, using one of the following two (2) methods:
^
Worldwide Diagnostic system (WDS). Use B7 CD-ROM dated April, 2000 or later.
^
Service Bay Technical System (SBTS) and the New Generation STAR (NGS) Tester with Rotunda flash cable (007-00531) and Rotunda flash
card (007-00532). Use R00 Calibration CD-ROM dated March, 2000 or later.