Focus L4-2.0L SOHC VIN P (2000)
Seat Belt Height Adjuster: Service and Repair
REMOVAL
4-door, 5-door and Wagon
1. Detach the safety belt lower anchor.
3-door
2. Detach the safety belt lower anchor.
1
Remove the Torx bolt from the anchor rail.
2
Slide the safety belt off the anchor rail.
All Vehicles
3. Detach the B-pillar upper trim panel.
1
Detach the retaining clips.
2
Remove the lower anchor bolt and spacer from the safety belt webbing (4-door and Wagon shown).
3
Feed the safety belt webbing through the B-pillar upper trim panel.
NOTE: Certain production trim panels have a retaining clip on the front edge.