Focus L4-2.0L SOHC VIN P (2000)
2. Using the special tool, align the TR sensor and tighten the bolts.
3. Install the manual control lever.
4. CAUTION: Check the manual control lever is in position "3" same as "D" position.
Adjust the manual control lever to TR sensor "D" position.
1. "1"Low 1
2. "2" Low 2
3. "D" Drive
4. "N" Neutral
5. "R" Reverse
6. "P" Park
-
When in position "D" the marks on the manual control lever line up with the marks on the TR Sensor.
5. Connect the selector lever cable and the TR sensor electrical connector.
