Focus L4-2.0L SOHC VIN P (2000)
2.
Remove the outboard upper control arm bolt, and detach the upper control arm from the wheel knuckle.
NOTE
MAKE A NOTE OF THE POSITION OF THE UPPER CONTROL ARM TO AID IN INSTALLATION.
3.
For Wagons only. Remove the lower shock bolt and position the shock aside.
4.
Remove the inboard upper control arm bolt, and remove the arm.
Installation
NOTE
FINAL TORQUING OF THE REAR SUSPENSION COMPONENTS SHOULD BE CARRIED OUT AT OR NEAR THE CURB HEIGHT
SETTING. TO ACHIEVE THIS LOAD THE SUSPENSION.
1.
Install upper control arm and a new inboard upper control arm bolt.
2.
For Wagons only. Reposition shock and reinstall the lower shock bolt.
3.
Position the upper control arm in the wheel knuckle and install a new outboard upper control arm bolt.
4.
Reinstall rear wheel and tire.
5.
Recheck alignment to verify camber change, and set toe if necessary.
Labor Operation Claiming Chart
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
DEALER CODING
CONDITION
BASIC PART NO.
CODE
5500
07
