Focus L4-2.0L SOHC VIN P (2000)
Installation
All Vehicles
1. Install the wheel knuckle to strut pinch bolt.
2. Using the special tools, install the halfshaft.
3. CAUTION: The wheel hub retaining nut can be re-used four times, inspect the markings on the retaining nut and install a new retaining nut if
necessary.
NOTE: Do not fully tighten the wheel hub retaining nut at this stage.
Install the wheel hub retaining nut.
4. CAUTION: Make sure the heat shield is installed to prevent damage to the ball joint.
Install the lower arm to wheel knuckle nut and bolt.