Focus L4-2.0L SOHC VIN P (2000)
3. Remove the instrument panel lower panel.
1. Remove the screws.
2. Release the fastener.
4. Disconnect the steering column shaft from the steering gear pinion extension.
1. Remove the bolt.
2. Release the steering column shaft from the pinion extension.
5. Loosen the front wheel nuts.
6. Raise and support the vehicle.
7. Remove the wheels.
8. Remove the tie-rod end retaining nuts.
9. CAUTION: When the tie-rod ends are detached from the wheel knuckles, the ball joint seals must be wrapped in cloth to protect them.
Using the special tool, detach the tie-rod ends from the wheel knuckles.
