Focus L4-2.0L SOHC VIN P (2000)
Rear Cross-Member: Service and Repair
Removal
All Vehicles
1. Remove the stabilizer bar.
2. CAUTION: Make sure the wheel knuckles are supported before removing the suspension arms.
Remove the rear lower arms.
3. Remove the front lower arms.
4. Remove the upper arms.
5. NOTE: Support the exhaust system to prevent damage.
Detach the exhaust system bracket.
3-Door
6. Disconnect the EVAP emission canister vent solenoid electrical connector.
7. Detach the vent pipes.
