Focus L4-2.0L SOHC VIN P (2000)
Install the selector lever assembly.
-
Install the four nuts.
2. Connect the selector lever assembly electrical connector.
3. NOTE: The selector lever has its own detent mechanism. Holding the selector lever is not necessary.
Install the selector cable to the selector lever.
1. Shift the selector lever to "P".
2. Clip in the selector lever cable outer sleeve.
3. Clip in the selector lever cable.
4. Install the floor console.
5. Re-adjust the system.
Disassembly and Assembly
Disassembly
1. NOTE: Use vise jaw protectors for all work to be done in the vise.