Focus L4-2.0L SOHC VIN P (2000)
11. Remove the switches from the pedal assembly.
1
Speed control deactivation switch (colored green).
2
Stop lamp switch (colored grey).
3
Clutch position switch (colored red).
4
Starter safety switch (colored black).
12. NOTE: The complete pedal assembly must be removed to gain access to the clutch master cylinder retaining bolts.
Remove the pedal assembly.
13. Remove the clutch master cylinder.
-
Mount the pedal assembly in a suitable vise.
-
Remove the retaining bolts.
-
Detach the clutch master cylinder from the pedal assembly and slide the actuating rod off the pedal arm.
Installation
1. Install the clutch master cylinder.
-
Attach the actuating rod to the pedal arm.