Focus L4-2.0L SOHC VIN P (2000)
data link connector. Remove the finish panel. See Figure 2.
7.
Remove the clip securing the fluid tube bracket at the dash panel. See Figure 3.
8.
Remove the brake pedal pushrod retainer pin.
9.
Disconnect the electrical connectors at the pedal assembly. See Figure 3.
CAUTION
The complete clutch/brake pedal assembly must be removed from the vehicle to gain adequate clearance to properly tighten the bolts when installing
the new clutch master cylinder.
10.
Remove the pedal assembly from the vehicle and mount it in a vise. See Figure 4.