Focus L4-2.0L SOHC VIN P (2000)
Loosen the wheel hub retaining nut.
3. Raise and support the vehicle.
4. Remove the right-hand wheel.
5. CAUTION: Protect the ball point seal using a soft cloth to prevent damage.
Detach the right-hand lower arm.
1. Remove the bolt.
2. Detach the lower arm ball joint.
6. CAUTION: The wheel hub retaining nut can be re-used four times; mark the retaining nut.
Use a commercially available puller, detach the right-hand drive halfshaft from the wheel hub.
-
Unscrew and remove the hub nut and press out the hub from the wheel hub.
7. CAUTION: Support the halfshaft. The inner halfshaft joint must not be bent by more than 18 degrees.
