Focus L4-2.0L SOHC VIN P (2000)
6. Detach the watershield.
^
Using a plastic knife (disposable cutlery), cut through the Butyl strip to enable the watershield to be peeled back.
CAUTION: Do not touch the adhesive surface as re-bonding will be impaired.
7. Connect the window operating switch electrical connector.
8. Align the regulator clamp with the access hole.
9. Detach the window glass from the regulator clamp.
1. Push out the pin.
2. Push out the sleeve.
3. Remove the window glass from the regulator clamp.