Focus L4-2.0L SOHC VIN P (2000)
4. Mark the position of the lever in relation to the assembly plate.
5. Remove the wiper motor from the mounting plate and lever.
1. Remove the nut.
2. Remove the bolts.
INSTALLATION
1. Install the components in the reverse order.
NOTE:
^
Ensure that the wiper motor is in park position.
^
When installing the wiper linkage, fit the guide pins before fitting the bolts.
^
Ensure that the wiper blades do not touch the air cowl grille or the moulding.
2. Check the operation of the front wipers.
