Focus L4-2.0L VIN N (2006)
The basic and identification colors are abbreviated using the international norm IEC 757. The abbreviations are listed in Symbols.
Each function code has a specific basic color associated with it, which can also be seen in the chart of function codes on the next diagram. The
identification color is a colored stripe used to differentiate several wires with the same function within one component connector.
Using the circuit number and wire identification used in the above example we know the information about the wire.
WARNINGS
-
Always wear safety glasses for eye protection.
-
Use safety stands whenever a procedure requires being under a vehicle.
-
Be sure that the Ignition Switch is always in the OFF position, unless otherwise required by the procedure.
-
Set the parking brake when working on any vehicle. An automatic transmission should be in PARK. A manual transmission should be in
NEUTRAL.
-
Operate the engine only in a well-ventilated area to avoid danger of carbon monoxide.
-
Keep away from moving parts, especially the fan and belts, when the engine is running.
-
To prevent serious burns, avoid contact with hot metal parts such as the radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
-
Do not allow flame or sparks near the battery. Gases are always present in and around the battery cell. An explosion could occur.
-
Do not smoke when working on a vehicle.
-
To avoid injury, always remove rings, watches, loose hanging jewelry and avoid wearing loose clothing.
Symbols
