Focus L4-2.0L VIN N (2006)
5. To aid in removal of the bearing outer ring, install the bearing cage onto the inner ring and install the assembly into the wheel knuckle.
6. Using the special tools, remove the bearing outer ring from the wheel knuckle.
Installation
CAUTION: Avoid any impact on the wheel speed sensor ring.
CAUTION: Make sure the wheel speed sensor ring is clean.
CAUTION: Do not allow the wheel speed sensor ring to contact any magnetic surfaces.
1. CAUTION: Make sure the wheel bearing is installed into the wheel knuckle with the wheel speed sensor ring, colored black, at the wheel speed
sensor end of the wheel knuckle.
Using the special tools, install the new wheel bearing to the wheel knuckle.
2. Using the special tools, install the wheel hub into the wheel knuckle.
