ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Piston Inspection > < Cylinder Bore Taper
Engine System - General Information - Piston Pin to Bore Diameter Focus 1999 (08/1998-12/2004)
General Procedures

  1. NOTE:
    NOTE:The piston and piston pin form a matched pair. Do not mix up the components.
    Measure the diameter of the piston pin bore.
    • Measure the diameter in two directions.
    • If the values are not to specification, install both a new piston and a new piston pin.

Piston Inspection > < Cylinder Bore Taper