ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Cooling Fan Motor and Shroud - 1.6L Zetec-E (Zetec)-1.8L Zetec-E (Zetec)-2.0L Zetec-E (Zetec) > < Cooling Fan Motor and Shroud - 1.6L Zetec-SE (Sigma)-1.4L

Focus 1999 (08.1998-12.2004)

Engine Cooling - Coolant Expansion Tank Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Partially drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

  1. Disconnect the coolant hoses.

  1. Remove the coolant expansion tank retaining bolt.

  1. Remove the coolant expansion tank.
    • Lift the coolant expansion tank out of the retainer.

Installation

  1. To install, reverse the removal procedure.

Cooling Fan Motor and Shroud - 1.6L Zetec-E (Zetec)-1.8L Zetec-E (Zetec)-2.0L Zetec-E (Zetec) > < Cooling Fan Motor and Shroud - 1.6L Zetec-SE (Sigma)-1.4L