ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Thermostat - 1.6L Zetec-E (Zetec)-1.8L Zetec-E (Zetec)-2.0L Zetec-E (Zetec) > < Cooling System Backflushing

Focus 1999 (08.1998-12.2004)

Engine Cooling - Thermostat—1.6L Zetec-SE (Sigma)/1.4L Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.
  1. Remove the generator. For additional information, refer to Section  414-02 Generator and Regulator.

  1. Disconnect the radiator to thermostat housing inlet hose.

  1. Disconnect the heater hose from the thermostat housing.

  1. Remove the thermostat housing.

  1. Remove the thermostat.

Installation
  1. To install, reverse the removal procedure.
  1. Refill the cooling system.
    For additional information, refer to Cooling System-Drain And Refill in this section.

Thermostat - 1.6L Zetec-E (Zetec)-1.8L Zetec-E (Zetec)-2.0L Zetec-E (Zetec) > < Cooling System Backflushing