ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Generator - 1.6L Zetec-E (Zetec)-1.8L-2.0L-2.0L Duratec-RS (Zetec) > < Generator
Generator and Regulator - Generator—1.6L Zetec-SE (Sigma)/1.4L Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Remove the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.
  1. Remove the generator electrical connector cover.

  1. Disconnect the generator electrical connectors.

  1. Remove the generator lower bolt.

  1. Remove the generator.
    1. Remove the bolt and nut.
    1. Remove the generator.

Installation

  1. To install, reverse the removal procedure.

  1. Initialize the door window motors. For additional information, refer to Section  501-11 Glass, Frames and Mechanisms.

Generator - 1.6L Zetec-E (Zetec)-1.8L-2.0L-2.0L Duratec-RS (Zetec) > < Generator