ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Seat Backrest Latch - 3-Door-5-Door-Wagon > < Rear Seat Backrest Latch

Focus 1999 (08.1998-12.2004)

Seating - Front Seat Cushion—2.0L Duratec-ST (Zetec) Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

WARNING:
WARNING:Note the position of the wiring harnesses, to aid installation. An incorrectly routed wiring harness could become damaged when the seat is moved. Failure to follow this instruction may result in personal injury.
  1. Remove the front seat.
    For additional information, refer to Front Seat in this section.

  1. Detach the safety belt buckle pretensioner electrical connector from the underside of the seat.
    1. Using a suitable screwdriver, depress the locking tang.
    1. Disconnect the electrical connector.
    1. Detach the retaining clips.

  1. Detach the cushion heater mat electrical connector from the underside of the seat.
    1. Using a suitable screwdriver, depress the locking tang.
    1. Disconnect the electrical connector.
    1. Detach the retaining clips.

  1. Detach the seat height adjust motor electrical connector from the underside of the seat.
    1. Using a suitable screwdriver, depress the locking tang.
    1. Disconnect the electrical connector.
    1. Detach the retaining clips.

  1. Remove the front seat cushion.

Installation

  1. To install, reverse the removal procedure.

Rear Seat Backrest Latch - 3-Door-5-Door-Wagon > < Rear Seat Backrest Latch