Removal and Installation Removal | -
Remove the side impact bolster. | | -
Remove the door speaker (if equipped). | | -
Disconnect the speaker electrical connector. | | -
Detach the door latch release handle. | | -
CAUTION:Do not touch the adhesive surface as re-bonding will be impaired. Detach the watershield. - Using a plastic knife (disposable cutlery), cut through the Butyl strip to enable the watershield to be peeled back.
| | -
Connect the winder handle. | | -
Remove the window glass retaining bolts. - Align the bolts with the access holes.
| | -
Detach the door glass from the regulator. - Hold the window glass at the top of the opening.
- Lower the regulator.
| | -
CAUTION:Make sure the window glass is adequately supported at the top of the opening. Using suitable hooks, raise and secure the window glass. | Installation | -
To install, reverse the removal procedure. | | |