Removal and Installation Name Specification Rocker panel Removal | -
General notes - Before beginning the repair, remove the door, the door weatherstrip, the rocker panel trim, the lower door hinge, the fender and the inner fender.
- Move the floor covering and wiring away from the working area.
- Pay attention to the cut of the replacement part in the area of the A-pillar.
| | -
Rocker panel - Cutting area.
- Cut point.
| Installation | -
Rocker panel - At the cut edge, spot weld the backing strip and continuous MIG seam weld.
- Continuous MIG seam weld
- Puddle weld.
| | |