Front Wheel Alignment (at curb weight) — Caster
| Model | Decimal Degrees | Degrees and Minutes |
| | Nominal | Tolerance Range | Nominal | Tolerance Range |
| All variants | 2.98° | 4.08° to 1.88° | 2°59' | 4°05' to 1°53' |
Maximum variance left-hand side to right-hand side Caster 1.00° (1°00')
Front Wheel Alignment (at curb weight) — Camber
| Model | Decimal Degrees | Degrees and Minutes |
| | Nominal | Tolerance Range | Nominal | Tolerance Range |
| All variants | -0.54° | 0.77° to -1.85° | -0°32' | 0°46' to -1°51' |
Maximum variance left-hand side to right-hand side Camber 1.25° (1°15')
Front Wheel Alignment (at curb weight) — Total Toe Setting
| Derivative | Tolerance Range | Setting Adjustment, if required |
| All variants (decimal degrees) | 0.15° (Toe-in) ± 0.25° | 0.15° (Toe-in) ± 0.15° |
| All variants (degrees and minutes) | 0°09' (Toe-in) ± 0°15' | 0°09' (Toe-in) ± 0°09' |
| All variants (mm) | 1.2 mm (Toe-in) ± 2.0 mm | 1.2 mm (Toe-in) ± 1.2 mm |
Rear Wheel Alignment (at curb weight) — Camber
| Model | Decimal Degrees | Degrees and Minutes |
| | Nominal | Tolerance Range | Nominal | Tolerance Range |
| All variants | -1.44° | -0.12° to -2.76° | -1°26' | -0°07' to -2°46' |
Maximum variance left-hand side to right-hand side Camber 1.25° (1° 15')
Rear Wheel Alignment (at curb weight) — Total Toe Setting
| Derivative | Tolerance Range | Setting Adjustment, if required |
| All variants (decimal degrees) | 0.60° (Toe-in) to 0.10° (Toe-in) | 0.35° (Toe-in) ± 0.15° |
| All variants (degrees and minutes) | 0°36' (Toe-in) to 0°06' (Toe-in) | 0°21' (Toe-in) ± 0°09' |
| All variants (mm) | 4.8 mm (Toe-in) to 0.8 mm (Toe-in) | 2.8 mm (Toe-in) ± 1.2 mm |
Torque Specifications
| Item | Nm | lb-ft | lb-in |
| Tie-rod end locknut | 63 | 46 | - |
