Ford Workshop Service and Repair Manuals

Disconnecting Tool, Refrigerant Line 3/4" (white)

412-040 (34-002)

1. Evacuate the air conditioning system. For additional information, refer to Section  412-00 Climate Control System - General Information.

2. Raise the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

3. 

   CAUTION:Seal the refrigerant lines and the suction accumulator to prevent dirt ingress.
   Remove the suction accumulator.
   1. Using the special tool, disconnect the refrigerant line from the suction accumulator.
   2. Detach the refrigerant line from the suction accumulator.
   3. Remove the suction accumulator retaining bolts and nuts.

1. 

   NOTE:Install new refrigerant line O-rings.
   

   NOTE:Coat the refrigerant line O-rings with clean refrigerant oil prior to installation.
   Install the components in the reverse order.