Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
501-16 Wipers and Washers >
< Door Latch Remote Control
Focus RS 2003 (09.2002-)
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems
Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Liftgate Lock Cylinder - 3-Door-4-Door-5-Door
Handles, Locks, Latches and Entry Systems - Liftgate Lock Cylinder—3-Door/4-Door/5-Door
Focus RS 2003 (09/2002-)
Removal and Installation
Removal
Remove the liftgate latch.
For additional information, refer to
Liftgate Latch
in this section.
File down the liftgate lock cylinder housing to expose the spring and plunger.
Remove the spring and plunger. Discard the spring.
Remove the liftgate lock cylinder.
Installation
Using an M6 tap, cut a thread into the lock cylinder housing.
Install the liftgate lock cylinder.
Install the plunger.
NOTE:
Use loctite sealer on the top two threads below the screw head.
Install an M6 by 6.5mm screw to secure the plunger.
Install the liftgate latch.
Install the liftgate latch electrical connector.
Install the liftgate trim panel.
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems
Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Liftgate Lock Cylinder - 3-Door-4-Door-5-Door
501-16 Wipers and Washers >
< Door Latch Remote Control