Focus Wagon L4-2.0L DOHC VIN 3 (2002)
10. Remove the special tool.
11. Remove the special tool 303-465 from the camshafts.
12. NOTE: Turn the crankshaft two revolutions in the normal direction of rotation.
Check the valve timing by inserting the special tool. Correct it if necessary.
^
Install the special tool and make sure that the it is contact with the crankshaft.
^
Install the special tool into the camshafts; if necessary loosen the timing pulleys and correct the camshaft alignment.
^
Remove the special tools.
13. Install the blanking plug.
14. Install the spark plugs.
15. CAUTION: Use a blunt object (a plastic cable tie) to apply the silicone grease, to avoid damaging the spark plug connectors.
CAUTION: Push on the spark plug connectors, keeping them in line with the spark plugs.
NOTE: Coat the inside of the spark plug connectors with silicone grease to a depth of 5 - 10 mm.
