Focus ZTS L4-2.0L DOHC VIN 3 (2001)
General Module: Initial Inspection and Diagnostic Overview
1. Verify the customer concern.
2. Visually inspect for the following mechanical and electrical causes of the concern.
Visual Inspection Chart
3. Carry out a self-test using the self-test table.
4. If this test is unsuccessful, carry out a diagnosis using WDS.
Additional Testing
Additional Testing may be found at the these Systems:
-
For exterior lighting concerns, refer to Lighting and Horns.
-
For courtesy lamps/illuminated entry concerns, refer to Lighting and Horns.
-
For Perimeter anti-theft system concerns, refer to Antitheft and Alarm Systems.
-
For passive anti-theft concerns, refer to Antitheft and Alarm Systems.
-
For keyless entry and door locking concerns, refer to Keyless Entry.
-
For wiper/washer concerns, refer to Wiper and Washer Systems.
-
For Warning Chimes and Lamps, refer to Instrument Panel, Gauges and Warning Indicators.
