ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Vehicles With Power Windows|Page 9089 > < Vehicles With Power Windows|Page 9087
Page 3
background image

10. Position the lower part of the door glass top run outside the door.
11. Install the window regulator handle.

12. Align the regulator clamp with the access hole (power window shown).

13. Detach the window glass from the regulator.

1. Push out the pin.
2. Push out the sleeve.
3. Remove the glass from the regulator clamp.

14. Remove the window glass.

NOTE:  To aid removal of the door glass, stand on the inner side of the door. Make sure the glass is removed from the inside of the door.

INSTALLATION

Vehicles With Power Windows|Page 9089 > < Vehicles With Power Windows|Page 9087