ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Evaporator Case/Cowl - Interior Water leaks|Page 9474 > < Evaporator Case/Cowl - Interior Water leaks|Page 9472
Page 4
background image

e.

Remove white clips from sheet metal tabs as seen in Figure 4 and snap onto pins on backside of cowl grille. Next, if butyl seal is present,
remove it and clean the surface (Figure 5). Replace the right side Cowl Grille (1S4Z-5402228-CA).

f.

Reinstall cowl grille per Workshop Manual procedure, Section 501-02. Ensure the new cowl grille makes a good seal to the windshield glass
(Figure 6).

4.

Verify Repair:

Water test vehicle to verify the source of the leak has been repaired. If water appears to be coming from another source, discontinue this TSB and
refer to the appropriate Workshop Manual.

Other potential root causes are windshield sealer skips, cowl sheet metal sealer skips or weld burn holes, dash panel electrical grommets, front
floor grommets and front door sealing. Follow normal leak repair procedures for these sources.

PART NUMBER

PART NAME

YS4Z-19850-EA

Evaporator Case

Evaporator Case/Cowl - Interior Water leaks|Page 9474 > < Evaporator Case/Cowl - Interior Water leaks|Page 9472