ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Testing and Inspection|Page 5852 > < Hydraulic Control Assembly - Antilock Brakes|Testing and Inspection|Page 5850
Page 2
background image

Drain the brake fluid reservoir.
1. Connect a bleed tube to the bleed nipple and into a suitable container.
2. Depress the brake pedal until no more fluid is expelled.
3. Tighten the bleed nipple.

9. Lower the vehicle.

10. Remove the air cleaner. 
11. Remove the air cleaner outlet tube.

12. Disconnect the electrical connector.

13. Remove the central electrical box screw.

14. Detach the central electrical box.

^

Relocate to the air cleaner position.

Hydraulic Control Assembly - Antilock Brakes|Testing and Inspection|Page 5852 > < Hydraulic Control Assembly - Antilock Brakes|Testing and Inspection|Page 5850