Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir
Brake Fluid Reservoir
Removal
All Vehicles
1. CAUTION: If brake fluid is spilt on the paint work, the affected are must be immediately washed down with cold water.
Disconnect the electrical connector from the filler cap.
1. Pull back the tab.
2. Depress the clips.
3. Disconnect the electrical connector.
2. CAUTION: Make sure the filler cap does not become contaminated.
Remove the brake fluid reservoir filler cap.
3. Using a suitable clean suction device drain the reservoir.
4. Install the brake fluid reservoir tiller cap.
