Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Heater Core: Service and Repair
Remover/Installer, Cooling Hose Clamp
Special Tools
Removal
1. Drain the cooling system.
2. Using the special tool, disconnect the coolant hoses from the heater core.
3. Lower the vehicle.
4. Remove the floor console. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair
5. Remove the rear footwell vent air ducts.
6. Remove the footwell lower trim panel.
7. Open the glove compartment.
