Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Intake Manifold: Service and Repair
Removal
1. Unfasten the cable ties if necessary and install new ones when reinstalling.
CAUTION: Disconnect the battery ground cable.
2. Remove the air cleaner housing.
1. Pull off the mass air flow (MAF) sensor connector.
2. Detach the crankcase ventilation hose.
3. Detach the intake hose.
^
Pull out the air cleaner housing from the rubber bushings.
3. Detach the accelerator cable and the speed control cable (if equipped) from the throttle body.
4. Detach the EGR valve and EGR pipe bracket.
5. Pull off the vacuum hoses.
