Focus ZTS L4-2.0L DOHC VIN 3 (2001)
2. WARNING: Always wear protective goggles whim working with compressed air. This can prevent injury. Failure to follow these
instructions may result in personal injury.
Unscrew the spark plug on cylinder No. 1 and connect the compressed air supply.
3. CAUTION: Use compressed air at 7 to 10 bars.
Using the the special tools and apply compressed air to the cylinder.
^
Using the special tools, compress the valve springs and remove the valve collets using some grease and a small screwdriver.
^
Remove the valve spring retainers and the valve springs.
4. NOTE: Place all parts in order to one side. Remove the valve springs.
5. Using special tools, remove the valve stem seals.
Installation
1. Valve stem seal installation sleeve.
