Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Timing Belt: Service and Repair
NOTE:Ford does not provide camshaft gear timing marks, or information to perform timing belt service without the special tools shown
in this procedure.
Special Tools
Special Tools
Removal
1. General Instructions.
-
The positions of the engine mounting and the engine roll resistor are described looking from the transmission towards the engine.
-
If necessary, use Special Tool 412-108 to remove coolant and ventilation hoses.
-
Owing to special model variants, some steps do not apply to all vehicles. These are clearly marked in the text.
-
If necessary, cut the cable tie and install new on installation.
CAUTION: Disconnect the battery negative lead.
2. Raise and support the vehicle.
