Focus ZTS L4-2.0L DOHC VIN 3 (2001)
7. Lower the vehicle.
8. Detach the coolant expansion tank and lay it to one side.
9. Remove the PAS reservoir and lay it to one side.
10. CAUTION: Insert the wooden block between the oil pan and the jack.
Position the jack with the wooden block under the oil pan and raise so that the front engine mounting is free from load.
11. NOTE: Mark the position of the engine mounting.
Remove the front engine mounting.
12. Detach the timing belt upper cover.
-
Leave the timing belt cover in its installed position.
