Focus ZTS L4-2.0L DOHC VIN 3 (2001)
11. Disconnect the catalytic converter.
^
Discard the nuts.
12. Raise and support the vehicle.
13. CAUTION: The catalytic converter must be supported while the support bracket is removed.
Remove the catalytic converter.
^
Remove the front strap.
^
Discard the gaskets.
Installation
1. CAUTION: Failure to follow this instruction may cause damage to the support brackets and the catalytic converter.
Loosen the rear support bracket bolts so that the mating faces are touching, allowing the bracket to slide.
2. Install the catalytic converter.
^
Install a new gasket and nuts.
