Focus ZTS L4-2.0L DOHC VIN 3 (2001)
5. Using a nut and bolt, temporarily secure the catalytic converter to the bracket at the rear.
6. Tighten the catalytic converter to the exhaust manifold.
7. NOTE:
^
Always use a new catalyst to EGR valve pipe assembly.
^
Loosely assemble the pipe to both the EGR valve and the exhaust catalyst before tightening the unions.
Attach the catalytic converter.
1. Tighten the bolts on the catalytic converter bracket.
2. Install a new EGR-pipe.
3. Attach the heat shield.
8. Attach the bracket for the catalytic converter.
^
Tighten the bolts.
^
Remove the temporary bolt from the rear catalytic converter bracket.
