Focus ZTS L4-2.0L DOHC VIN 3 (2001)
1. Using a suitable M6 x 30 mm bolt, a suitable washer and the A/C compressor drive plate, install the clutch field coil.
2. Remove the M6 x 30 mm bolt, washer and A/C compressor drive plate.
NOTE: Install a new A/C compressor pulley snap ring.
3. Install the A/C compressor pulley.
-
Install the snap ring.
4. Install the A/C compressor drive plate.
5. Check the A/C clutch air gap. See: Adjustments
