ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Compressor Cut-Off/Cycling Switch|Page 8440 > < Air Conditioning Cycling Switch PCM Inputs|Page 8437
Page 1
background image

Refrigerant Pressure Sensor / Switch: Service and Repair
Compressor Cut-Off/Cycling Switch

REMOVAL

1. Remove the activated charcoal canister cleaning solenoid valve (if equipped).

-

Remove two bolts and lay the solenoid valve to one side.

NOTE:  Observe the "Health and Safety Rules".

2. Disconnect the low pressure switch connector.

A/C Low Pressure Switch Connector

3. Bypass the plug contacts for the air conditioning low pressure switch.

-

Start the engine and switch on the air conditioning.

-

Let the engine idle for 30 seconds.

-

Switch off the engine.

CAUTION:  Make sure that the air conditioning system is filled, otherwise it will be irreparably damaged.

Compressor Cut-Off/Cycling Switch|Page 8440 > < Air Conditioning Cycling Switch PCM Inputs|Page 8437