Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Refrigerant Pressure Sensor / Switch: Service and Repair
High Pressure Cutoff Switch
REMOVAL
NOTE: Apply "Health and safety and precautionary measures".
1. Raise the vehicle.
2. Remove the air conditioning high-pressure switch.
1. Disconnect the electrical connector.
2. Remove the high-pressure switch.
INSTALLATION
1. Refit the components in reverse order.
NOTE: Renew the O-rings and smear them with refrigerant oil.
2. Check the operation of the air conditioning system.
