Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Parking Lamp: Initial Inspection and Diagnostic Overview
1. Switch on the turn signal/hazard lamps to check the customer concern.
2. Check for the following causes of electrical faults:
VISUAL INSPECTION CHART
Electrical
^
Circuit(s)
^
Fuse
^
Bulb(s)
^
Plug loose, corroded or faulty
3. If the concern has not been rectified as a result of this check, look up the symptom(s) in the following symptom chart and proceed as instructed.
See: Symptom Related Diagnostic Procedures