Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Evaporative Check Valve: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Do not remove the evaporative emission hoses from the assembly as damage may occur to the valve or the fittings. The fuel vapor
control valve and hoses are repaired as an assembly only.
2. Disconnect and remove the fuel vapor control valve tube assembly at the inline T connector.
3. Disconnect the vapor tube.
4. Remove the fuel vapor control valve tube assembly.
1. Remove the hose.
2. Remove the fuel vapor control valve tube assembly nut.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out the Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
