Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Oil Separator: Service and Repair
REMOVAL
1. Remove the exhaust manifold.
2. Remove the Three Way Catalytic Converter (TWC).
3. Pull upward to remove the PCV valve from the crankcase vent oil separator.
4. Remove the bolts.
5. Remove the crankcase vent oil separator.
NOTE: Remove and discard the oil separator-to-cylinder block gasket.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Use a new oil separator-to-cylinder block gasket when installing the crankcase vent oil separator
