Focus ZTS L4-2.0L DOHC VIN 3 (2001)
CAUTION: Fuel injection equipment is manufactured to very precise tolerances and fine clearances. It is therefore essential that absolute cleanliness is
observed when working with these components. Always install blanking plugs to any open orifices or lines.
NOTE: Fuel supply line connectors are white or are identified by a white band. Fuel return line connectors are red or are identified by a red band.
1. Install the fuel line quick release coupling.
NOTE: Make sure the collar on the fuel line is inserted fully into the fuel line quick release coupling.
2. Install the fuel line quick release coupling.
1. Install the fuel line quick release coupling locking tang.
2. Rotate the fuel line quick release coupling locking tang into position.
NOTE: Make sure the collar on the fuel line is inserted fully into the fuel line quick release coupling before the locking tang is locked.
3. Install the fuel line quick release coupling.
1. Install the fuel line quick release coupling.
2. Press the fuel line quick release coupling locking tang into position.
NOTE: Make sure the collar on the fuel line is inserted fully into the fuel line quick release coupling before the locking tang is locked.
