Focus ZTS L4-2.0L DOHC VIN 3 (2001)
10. Install the timing belt.
11. CAUTION:
^
Use a blunt object (a plastic cable tie) to apply the silicone grease, to avoid damaging the spark plug connectors.
^
Push on the spark plug connectors, keeping them in line with the spark plugs.
NOTE: Apply silicone grease to the inside of the spark plug connectors to a depth of 5-10 mm.
Install the cylinder head cover.
1. Insert the 10 bolts and tighten them in two stages.
^
Stage 1: 2 Nm.
^
Stage 2: 7 Nm.
2. Attach the crankcase ventilation hose.
3. Fit the spark plug connectors and make sure that they engage correctly.
12. NOTE: Check that the gasket on the upper timing belt cover is seated correctly and adjust if necessary.
Install the upper timing belt cover.
13. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Connect the battery ground cable.
14. Check the fluid levels and adjust if necessary.
15. Check that the vacuum hoses and cables are routed correctly and fix in place using cable ties .
