Focus ZTS L4-2.0L DOHC VIN 3 (2001)
8. Remove the passenger air bag module trim cover.
1. Lift the outer edge.
2. Lift the cover moving it toward the windshield to disengage the retaining clips.
9. Detach the passenger air bag module and reinforcement bracket.
10. NOTE: It may be necessary to use a pair of pointed nose pliers to release the electrical connector locking tangs.
Remove the passenger air bag module.
Disconnect the electrical connector.
INSTALLATION
WARNING: Repair is made by installing a new part only. Do not install new parts unless the original part is damaged or found to be unserviceable
after the completion of the correct diagnostic procedures. Failure to follow this instruction may result in personal injury.
