Focus ZTS L4-2.0L DOHC VIN 3 (2001)
WARNING: IF A NEW PASSENGER AIR BAG MODULE IS BEING INSTALLED FOLLOWING AIR BAG DEPLOYMENT, A NEW
INSTRUMENT PANEL MUST BE INSTALLED. FAILURE TO FOLLOW THIS INSTRUCTION MAY RESULT IN PERSONAL INJURY.
1. Install a new instrument panel.
2. Connect the passenger air bag module electrical connector.
3. Install the passenger air bag module and reinforcement bracket.
4. Install the passenger air bag trim cover.
CAUTION: Make sure that all the passenger air bag trim cover retaining clips are correctly engaged and the trim cover is flush with instrument
panel.
5. Install the right-hand demister pipe.
