Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Seat Belt: Vehicle Damage Warnings
CAUTION:
^
Make sure the spacer is correctly located between the floor covering and inner sill.
^
Make sure that the rear end of the anchor rail, on 3-door vehicles, is correctly located before tightening the bolt.
^
Make sure the pin on the B-pillar trim is located correctly into the height adjuster.
^
Make sure the locating dowel on the underside of the retractor is correctly located.
^
Check the operation of the safety belt retractor, the cable routing and latch interlock operation before fully assembling the rear seat backrest.