Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Seat Belt Retractor: Service and Repair
Front Safety Belt Retractor
4-Door, 5-Door and Wagon
REMOVAL
1. Detach the safety belt lower anchor.
2. Detach the B-pillar upper trim panel.
1. Detach the retaining clips.
2. Remove the lower anchor bolt and spacer from the safety belt webbing (4-door and Wagon shown).
3. Feed the safety belt webbing through the B-pillar upper trim panel.
NOTE: Certain production trim panels have a retaining clip on the front edge.
3. Detach the upper safety belt anchor.
